Filter
Top Products
16-17
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 16 Configuring RADIUS Features
RADIUS Packet of Disconnect
interface ATM1/0/1
no ip address
atm clock INTERNAL
no atm auto-configuration
atm ilmi-keepalive
no atm address-registration
pvc 0/16 ilmi
!
!
interface ATM1/0/1.111 multipoint
! -----This description is used in the calling-station-id ------
description test_descr
pvc 0/100
class-vc ppp_auto1200
!
pvc 0/101
class-vc ppp_auto1200
!
interface GigabitEthernet8/0/0
ip address 10.10.0.1 255.255.255.0
negotiation auto
pppoe enable group PPPOETEST
!
interface Virtual-Template1
ip unnumbered Loopback0
peer default ip address pool default
ppp authentication chap callin
!
ip local pool default 3.3.3.1 3.3.3.10
!
radius-server attribute 31 pppox nas-port
radius-server attribute 31 pppox mac-addr
radius-server attribute 32 include-in-access-req
radius-server host 10.0.0.8 auth-port 1645 acct-port 1646 key cisco
Related Commands for PPPoX Calling Station ID
RADIUS Packet of Disconnect
The RADIUS Packet of Disconnect feature consists of a method for terminating a session that has
already been connected. This packet of disconnect (POD) is a RADIUS access_request packet and is
intended to be used in situations where the authenticating agent server wants to disconnect the user after
the session has been accepted by the RADIUS access_accept packet. This may be needed in at least two
situations:
• Detection of fraudulent use, which cannot be performed before accepting the session. A price
structure so complex that the maximum session duration cannot be estimated before accepting the
session. This may be the case when certain types of discounts are applied or when multiple users
use the same subscription simultaneously.
Command Description
ip radius source-interface Requires RADIUS to use the IP address of a specified interface
for all outgoing RADIUS packets