Filter
Top Products
1-18
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 1 Broadband Aggregation and Leased-Line Overview
New Features, Enhancements, and Changes
New Features in Cisco IOS Release 12.2(33)SB3
In Cisco IOS Release 12.2(33)SB3 support was added on the Cisco 10000 series router for the following
feature:
• IGP Convergence Acceleration
For more information, see IGP Convergence Acceleration, page 4-3
New Features in Cisco IOS Release 12.2(33)SB2
In Cisco IOS Release 12.2(33)SB2 support was added on the Cisco 10000 series router for the following
features:
• MLP at LNS with ATM Tunnel
For more information, see MLP on LNS, page 22-18
• MLPoE LAC Switching
For more information, see the MLPoE LAC Switching, page 22-24
New Features in Cisco IOS Release 12.2(33)SB
In Cisco IOS Release 12.2(33)SB support was added on the Cisco 10000 series router for the following
features:
• Unicast Reverse Path Forwarding (uRPF)
For more information, see Chapter 13, “Unicast Reverse Path Forwarding”
• Any Transport over MPLS (AToM): Tunnel Selection
For more information, see the “Any Transport over MPLS—Tunnel Selection” section on
page 20-47
• L2VPN Interworking: Ethernet/VLAN to ATM AAL5
For more information, see the “Ethernet/VLAN to ATM AAL5 Interworking” section on page 21-5
• L2VPN Interworking: Ethernet/VLAN to Frame Relay
For more information, see the “Ethernet/VLAN to Frame Relay Interworking” section on
page 21-17
• IPv6 VPN over MPLS (6VPE)
For more information, see the “IPv6 VPN over MPLS” section on page 4-7
• Any Transport over MPLS (AToM): Remote Ethernet Port Shutdown
For more information, see the “Remote Ethernet Port Shutdown” section on page 20-25
• NSF / SSO - Any Transport over MPLS (AToM)
For more information, see the “NSF and SSO—L2VPN” section on page 20-6
• L2VPN Local Switching--HDLC/PPP
For more information, see the “L2VPN Local Switching—HDLC/PPP” section on page 20-10
• MLP at LNS
For more information, see the “MLP on LNS” section on page 22-18