Cisco Systems 10000 Network Router User Manual


 
A-4
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Appendix A RADIUS Attributes
Vendor-Proprietary RADIUS Attributes
Vendor-Proprietary RADIUS Attributes
85 Acct-Interim-Interval Supported in Cisco IOS but not tested
on the Cisco
10000 series router.
86 Acct-Tunnel-Packets-Lost Not Supported
87 NAS-Port-ID Supported and tested
88 Framed-Pool Not Supported
90 Tunnel-Client-Auth-Id Not Supported
91 Tunnel-Server-Auth-ID Not Supported
200 IETF-Token-Immediate Not Applicable
Table A-2 Vendor-Proprietary RADIUS Attributes
Number Vendor-Proprietary Attribute Status
17 Change-Password Typically not used in DSL environment
21 Password-Expiration Typically not used in DSL environment
68 Tunnel-ID Supported and tested in accounting
108 My-Endpoint-Disc-Alias Not Applicable
109 My-Name-Alias Not Applicable
110 Remote-FW Not Applicable
111 Multicast-GLeave-Delay Not Applicable
112 CBCP-Enable Not Applicable
113 CBCP-Mode Not Applicable
114 CBCP-Delay Not Applicable
115 CBCP-Trunk-Group Not Applicable
116 Appletalk-Route Not Applicable
117 Appletalk-Peer-Mode Not Applicable
118 Route-Appletalk Not Applicable
119 FCP-Parameter Not Applicable
120 Modem-PortNo Not Applicable
121 Modem-SlotNo Not Applicable
122 Modem-ShelfNo Not Applicable
123 Call-Attempt-Limit Not Applicable
124 Call-Block-Duration Not Applicable
125 Maximum-Call-Duration Not Applicable
126 Router-Preference Not Applicable
Table A-1 RADIUS IETF Attributes (continued)
Number IETF Attribute Status