Cisco Systems 10000 Network Router User Manual


 
5-46
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Chapter 5 Configuring the Layer 2 Tunnel Protocol Access Concentrator and Network Server
L2TP Network Server
accept-dialin
protocol l2tp
virtual-template 1
terminate-from hostname lac1-vpn1
local name r4-1
lcp renegotiation on-mismatch
l2tp tunnel password 7 1511021F0725
l2tp tunnel receive-window 100
l2tp tunnel retransmit retries 7
l2tp tunnel retransmit timeout min 2
!
!Terminates the tunnel from the LAC.
vpdn-group 2
accept-dialin
protocol l2tp
virtual-template 2
terminate-from hostname lac1-vpn2
local name r4-2
lcp renegotiation on-mismatch
l2tp tunnel password 7 121A0C041104
l2tp tunnel receive-window 100
l2tp tunnel retransmit retries 7
l2tp tunnel retransmit timeout min 2
!
!
!Associates the VRF with the interface.
interface Loopback1
ip vrf forwarding vpn1
ip address 10.1.1.1 255.255.255.255
!
interface Loopback2
ip vrf forwarding vpn2
ip address 10.1.2.1 255.255.255.255
!
interface FastEthernet0/0/0
no ip address
shutdown
!
!Configures the interface used to connect to the LAC.
interface GigabitEthernet6/0/0
ip address 10.1.1.45 255.255.255.0
negotiation auto
!
interface GigabitEthernet7/0/0
no ip address
negotiation auto
!
!Associates the VRF with the interface.
interface GigabitEthernet7/0/0.1
encapsulation dot1Q 11
ip vrf forwarding vpn1
ip address 192.168.1.1 255.255.255.0
!
interface GigabitEthernet7/0/0.2
encapsulation dot1Q 12
ip vrf forwarding vpn2
ip address 192.168.2.1 255.255.255.0
!
!Associates the VRF with the virtual template interface.
interface Virtual-Template1
ip vrf forwarding vpn1
ip unnumbered Loopback1
no peer default ip address
ppp authentication chap vpn1