Filter
Top Products
3-64 Diagnostic Tools
DAAD Diagnostic Messages
continued
Message Description Recommended Action
Threshold
violations for
drive (bay) X
This is a list of the individual
thresholds that have been
violated for this drive.
The drive may need to be replaced. Run the
Compaq Diagnostics Utility to determine if the
drive has been initialized and the threshold
violation warrants
drive replacement.
Unknown
disable code
A code was returned from the
array accelerator board that
DAAD does
not recognize.
Obtain the latest version of DAAD.
Warning bit
detected
A monitor and performance
threshold violation may have
occurred. The status of a logical
drive may not be OK.
Check the other error messages for an
indication of
the problem.
WARNING -
Drive Write
Cache is
enabled on X
Drive has its internal write cache
enabled. The drive may be a
third-party drive or the drive’s
operating parameters may have
been altered. Condition may
cause data corruption if power to
the drive is interrupted.
Replace the drive with a Compaq supplied
drive, or restore the drive’s operating
parameters.
Wrong
Accelerator
This could mean that either the
board was replaced in the wrong
slot or placed in a system that
was previously configured with
another board type. Included
with this message is a message
indicating the type of adapter
sensed by DAAD and a message
indicating the type of adapter last
configured in EISA nonvolatile
RAM.
Check the diagnosis screen for other error
messages. Run the System Configuration
Utility to update the system configuration.