Compaq 1850R Server User Manual


 
3-39
Compaq ProLiant 1850R Servers Maintenance and Service Guide
32-Bit DualSpeed NetFlex-2 Controller and
32-Bit DualSpeed NetFlex-2 Token Ring
Controller
Test Error Codes
The 6000 series of Diagnostic error codes identifies failures with 32-bit DualSpeed
NetFlex-2/Token Ring Controllers. Corrective action may require replacement of the 32-bit
DualSpeed NetFlex-2/Token Ring Controller.
Table 3-14
32-Bit DualSpeed NetFlex-2 Controller and
32-Bit DualSpeed NetFlex-2 Token Ring Controller
Test Error Codes
Error Code Description Recommended Action
6000-xx
6001-xx
6002-xx
6014-xx
6016-xx
6028-xx
6029-xx
6089-xx
Network card ID failed
Network card setup failed
Network card transmit failed
Network card Configuration failed
Network card Reset failed
Network card Internal failed
Network card External failed
Network card Open failed
The following steps apply to error codes
6000-xx through 6089-xx:
1. Check the controller installation in the
EISA slot.
2. Check the interrupt type and number
setting.
3. Check the media connection at the
controller and Multistation Access
Unit (MAU).
4. Check the media speed (4/16 ) and
type Unshielded Twisted
Pair/Shielded Twisted Pair
(UTP/STP) settings.
5. Check the MAU, cabling, or other
network components.
6. Replace the controller.