Filter
Top Products
2-36 Removal and Replacement Procedures
Processor Power Module
Every processor comes with a processor power module (DC-to-DC converter) that provides
power for the processor.
WARNING:
To reduce the risk of personal injury from hot surfaces,
allow the internal system components to cool before touching.
To remove a processor power module:
1.
Perform the preparation procedures. See page 2-4.
2.
Remove the server cover. See page 2-7.
3.
Press the socket latches 1 outward with your index fingers until the latches snap open.
4.
As the socket latches open, the module comes out of the socket 2.
1
2
Figure 2-31. Removing a processor power module
Reverse steps 1 through 4 to install a processor power module. The processor power module is
keyed to ensure correct alignment. Use the System Configuration Utility to reconfigure the
server. See Chapter 3 for more information.