Filter
Top Products
2-13
Compaq ProLiant 1850R Servers Maintenance and Service Guide
Hot-Plug Power Supply
The hot-plug power supply module is used for both the Compaq ProLiant 1850R server bays.
To remove a hot-plug power supply, or to install an additional one:
IMPORTANT:
When using a single power supply module, it must populate
the outer bay. Both bays can be populated for redundant power supply
capability.
1.
Perform the preparation procedures. See page 2-4.
2.
Push in the port-colored tabs on the power supply blank 1.
3.
Pull the tab out until it opens 2.
4.
Pull the power supply blank out the back of the chassis 3.
3
1
2
Figure 2-7. Removing the hot-plug power supply blank