Filter
Top Products
3-86 Diagnostic Tools
Remote Service Features
Compaq servers have the following management features that you can access by modem or
network:
Table 3-26
Compaq Servers Remote Management Features
Feature Description
Service Session Provides remote access to all the utilities on the system partition, including
Diagnostics utilities, Inspect, ROMPaq, Drive Array Advanced Diagnostics
(DAAD), and the System Configuration Utility. Also provides the capability
for remote file transfer services to and from the system partition.
Disk-Based
Diagnostics
Provides remote diagnostic capability after you configure ASR-2 and the
reset restart option to restart from Compaq Utilities. Also allows you to
view Health Logs. Disk-based diagnostics can also be run locally. Press
F10
during the restart process when the cursor moves to the upper-right
corner of the monitor.
Server Restart Provides the ability to restart the server remotely from Compaq Insight
Manager while the operating system is running. Allows the server to
restart back to the operating system or restart to the system partition.
Provides a complete system reset to all peripherals. If you select Boot to
Compaq Utilities from Compaq Insight Manager, Compaq Utilities loads
the appropriate remote services so that remote access is available. If
network status is enabled, network support is loaded. If Dial-In status is
enabled, the modem is set to
auto-answer.
Configuration Utility Allows you to run the System Configuration Utility remotely. You can also
run the remote configuration utility locally. Press
F10
during the restart
process when the cursor moves to the upper-right corner of the monitor.
Firmware Updates Allows you to update the server firmware remotely. Uses firmware images
on the system partition that might have been previously uploaded with the
file transfer services.