Filter
Top Products
4-2 Connectors, Switches, and Jumpers
The following table defines the function for each switch setting of SW1. The default positions
are indicated below.
CAUTION: Setting the processor switchbanks incorrectly can result
in permanent damage to the processor and/or data loss.
Table 4-1
System Maintenance Switch Settings - SW1
Switch Function Set to ON Set to OFF
1 Video Disable
Override
Disable Embedded Video
Always
ROM auto-detects for
an optional video
card. If one is not
found, then the
onboard video is
enabled.
2 Lock
Configuration
Locks system
configuration
Allows configuration
to be changed.
3 Rack Mount * Rack Mount
Configuration
Tower Configuration
4 Diskette
Override
Overrides configuration
and allows booting from
diskette
* Booting from
diskette is controlled
by the configuration.
5 Power-ON
Password
Power-ON password is
disabled.
* Power-ON password
is enabled (through
system configuration).
6 Maintenance Places server in
maintenance mode for
testing.
* Places server in
normal mode.
* Must be set as shown for the server to operate correctly.