Filter
Top Products
2-11
Compaq ProLiant 1850R Servers Maintenance and Service Guide
Drive Cage Fan and Bracket
To remove the drive cage fan and bracket:
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Disconnect the data and power cables connected to the CD-ROM adaptor board
(if installed) and the hot-plug SCSI backplane board.
4. Unplug the fan from the power supply.
5. Remove the three T-15 screws connecting the fan and bracket to the back of the
drive cage.
6. Pull the fan and bracket away from the drive cage.
Figure 2-5. Removing the drive cage fan
Reverse steps 1 through 6 to replace the drive cage fan and bracket.