Filter
Top Products
3-28 Diagnostic Tools
7. Install a loopback plug (Part Number 142054-001), when required by Diagnostics.
8. Run the latest version of Diagnostics.
Running Diagnostics
There are two ways to access the utilities:
■
From the System Partition.
■
From diskette. A diskette can be created from the SmartStart CD.
1. Accessing the utilities from the system partition:
2. Reboot the server by pressing the
Ctrl+Alt+Delete
keys.
Press
F10
when the following prompt appears at the top of the screen during POST.
Press
“F10”
for System Partition Utilities.
IMPORTANT:
The text appears for only two seconds. If you do not press
F10
during this time, you must reboot the server.
3. From the System Configuration Main Menu, select Diagnostics and Utilities.
If there are errors detected in your Server Health Log, the Diagnostics Utility automatically
displays the following screen message:
CAUTION: Errors have been detected in you
Server Health Log. Diags will now identify your
system hardware.
1. Press the
Enter
key to continue.
2. After a short pause, the Server Health Log menu displays with a list of system errors. If
there is more than one error, press the Space Bar to select the error you want to correct.
Press
Enter
.
3. The Diagnostics Utility prompts you and suggests corrective action.