Filter
Top Products
2-23
Compaq ProLiant 1850R Servers Maintenance and Service Guide
Installing a 1/2 Height Tape Drive or CD-ROM
Drive in
Bay A or B
ProLiant 1850R Servers have two bays, bay A and bay B, for removable media. Bays A and B
can accomodate two half-height or one full height device(s). Devices that can be installed
include: an additional CD-ROM drive; 1-inch or 1.6-inch height hard drives (non-hot-plug);
SLR, DAT, or DLT tape drives.
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Remove the rack-mount bezel. See page 2-8.
4. Remove the T-15 torx screw 1 securing the media tray to the chassis then slide the tray
out of the server 2.
5. Remove the removable media tray.
1
2
Figure 2-16. Removing the removable media tray