Compaq 1850R Server User Manual


 
2-35
Compaq ProLiant 1850R Servers Maintenance and Service Guide
To remove either of the processors:
1. Perform the preparation procedures. See page 2-4.
2. Remove the server cover. See page 2-7.
3. Push in the retaining clips on each side of the processor 1.
4. Pull out the processor 2.
1
2
Figure 2-30. Removing the processor
Reverse steps 1 through 4 to replace the processor. Use the System Configuration Utility to
reconfigure your system if you are replacing a faulty processor. See Chapter 3 for more
information.
CAUTION:
Processors on the same processor board MUST be
installed in matched frequency.
IMPORTANT:
The processor is keyed to be sure correct alignment. Align
the pattern of pins in the processor with the pattern of holes in the socket.
The pins and holes will not line up if the processor is turned the wrong way.