Filter
Top Products
2-4 Removal and Replacement Procedures
Preparation Procedures
Before beginning any of the removal and replacement procedures:
1. Turn OFF the server and any peripheral devices.
2. Disconnect the AC power cord from the AC outlet, then from the server.
3. Disconnect all external peripheral devices from the server.
4. For most removal and replacement procedures, you must remove the server from the
rack and place it on a sturdy table or workbench. Refer to the ProLiant 1850R Setup
and Installation Guide.
WARNING:
To reduce the risk of personal injury, do not attempt to
remove the server from the rack by yourself. A minimum of two
people are required to remove the server from the rack.
WARNING:
Because the rack allows you to stack computer
components on a vertical rather than horizontal plane, you must take
precautions to provide for rack stability and safety. It is important
that you follow these precautions to provide for rack stability and
safety, and to protect both personnel and property. Heed all cautions
and warnings throughout the installation instructions that came with
the server.
CAUTION:
Electrostatic discharge can damage electronic
components. Be sure you are properly grounded before beginning
any installation procedure. See the section titled “Electrostatic
Discharge” for more information.