Filter
Top Products
2-39
Compaq ProLiant 1850R Servers Maintenance and Service Guide
IMPORTANT: When a jumper is on header E2 / pins 6-7, the internal
battery is used. When a jumper is on header E2 / pins 5-6, the external
battery is used.
IMPORTANT: The system board contains a Lithium Manganese Dioxide
or Lithium Vanadium Pentoxide battery that should not be disposed of
together with the general waste. In order to forward it to recycling or proper
disposal, please use the public collection system or return it to Compaq, or
your authorized Compaq Partners.
5.
Remove the backing from the adhesive on the hook-and-loop fastener strip attached to
the battery.
6.
Place the battery and the hook-and-loop fastener strip on the designated chip, as shown
in the following illustration.
7.
Plug the battery connector onto pins 1-4 of header E2 on the system board.
Figure 2-34. Attaching the battery to the battery jumpers
8.
Place the sticker included with your battery kit on the back of your server above the
power connector.
9.
Run the Compaq System Configuration Utility to reconfigure the system. See Chapter 3
for more information.