Filter
Top Products
3-6 Diagnostic Tools
POST Error Messages
continued
Error Code
Audible
Beeps
L=Long
S=Short
Probable Source of
Problem
Action
162-System
Options Not Set
2S Configuration incorrect. Run the System Configuration
Utility
and correct.
163-Time & Date
Not Set
2S Invalid time or date in
configuration memory.
Run the System Configuration
Utility
and correct.
170- Expansion
Device Not
Responding
None EISA or PCI expansion
board failure.
Check board for secure
installation. Replace the failed
board if necessary.
172-
Configuration
Nonvolatile
Memory Invalid
None Nonvolatile configuration
corrupt or jumper
installed.
Run the System Configuration
Utility
and correct.
172-1
Configuration
Nonvolatile
Memory Invalid
None Nonvolatile configuration
corrupt.
Run the System Configuration
Utility
and correct.
172-2 IRC
Configuration
Invalid
None IRC enabled and video
controller is in PCI slot on
the secondary bus.
Move video controller to a PCI
slot on the primary PCI bus.
173- Slot ID
Mismatch
None Board replaced,
configuration not updated.
Run the System Configuration
Utility
and correct.
174-
Configuration/Slo
t Mismatch
Device Not
Found
None EISA or PCI board not
found.
Run the System Configuration
Utility
and correct.
175-
Configuration/Slo
t Mismatch
Device Found
None EISA or PCI board added,
configuration not updated.
Run the System Configuration
Utility
and correct.
176-Slot with Not
Readable ID
Yields
Valid ID
None EISA or PCI board in slot
that should contain an
ISA board.
Run the System Configuration
Utility
and correct.