Compaq Interconnect Switch Switch User Manual


 
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 4-15
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
6. Type a value between 1 and 25 seconds in the Max Response field.
7. Click Apply.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.
Configuring Spanning Tree Protocol Settings
The GbE Interconnect Switch supports the 801.2d Spanning Tree Protocol (STP), which
allows you to create alternative paths (with multiple switches or other types of bridges) in
your network.
When you select STP Switch Settings from the Spanning Tree menu, the following screen
is displayed.
You can change the following STP parameters:
Spanning Tree Protocol—Choose to enable or disable the STP setting.
Bridge Max Age (6–40 Sec)—Type the maximum age. The range is 6 to 40 seconds.
When the maximum age is reached, if a Bridge Protocol Data Unit (BPDU) has still not
been received from the Root Bridge, your GbE Interconnect Switch will start sending its
own BPDU to all other switches for permission to become the Root Bridge. If your GbE
Interconnect Switch has the lowest bridge identifier, it will become the Root Bridge.