Compaq Interconnect Switch Switch User Manual


 
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide B-1
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:07 AM
B
RJ-45 Pin Specification
When connecting the Compaq ProLiant BL p-class GbE Interconnect Switch to a switch,
bridge, or hub, an Ethernet cable is necessary.
Figure B-1 displays the standard RJ-45 receptacle/connector for 10/100 Mb/s and Gigabit
over Copper ports. Table B-1 indicates the pin number and wire color assignments for the
switch-to-network adapter card connection, and the Ethernet cable for the switch-to-switch,
switch-to-hub, or switch-to-bridge connection. Table B-2 provides the same information for
the Gigabit over Copper ports.
NOTE: A cable configured for Gigabit over Copper can also be used on a 10/100-Mb/s connection.
Figure B-1: Standard RJ-45 receptacle/connector for
10/100 Mb/s and Gigabit over Copper
Table B-1: RJ-45 Connector Pin Assignment for 10/100-Mb/s
Contact Media Direct Interface Signal Color Match
1 Tx + (transmit) White/Orange
2 Tx - (transmit) Orange/White
3 Rx + (receive) White/Green
4 Not used Blue/White
5 Not used White/Blue
6 Rx – (receive) Green/White
7 Not used White/Brown
8 Not used Brown/White