Compaq Interconnect Switch Switch User Manual


 
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-20 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
When you select Static VLAN Entry from the VLAN menu, the following screen is
displayed.
The 802.1Q Static VLANs window allows you to create or delete entries to the 802.1Q Static
VLAN table.
To add an entry to this table, click Add and then fill in the appropriate information in the
following window. To modify an entry, click Modify beside the appropriate VID. To delete
an entry, click the icon in the Delete column.
The 802.1Q Static VLAN Setup window allows you to change the following parameters for
each VLAN ID (VID):
VID—Allows you to type the VLAN ID number of the VLAN you want to add. The
range is 1 to 4094. This field is grayed out in the Modify mode.
VLAN Name—Allows you to type the name of the VLAN that is being created.
Tag—Specifies the port as either 802.1Q tagging or 802.1Q untagging. Click the check
box to designate the port as tagging.
None—Allows you to select the radio button to specify that the port is not a static
member of the VLAN, but with no restrictions for joining the VLAN dynamically
through GVRP.