Filter
Top Products
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-34 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Configuring the SNMP Manager
When you select SNMP Manager from the Management menu, the following screen is
displayed.
The SNMP Manager Configuration window allows you to configure SNMP parameters.
You can change the following parameters:
• Community String—Type a user-defined SNMP community name.
• Access Right—Choose the access of Read-Only or Read-Write using the SNMP
community name.
• Status—Set the status of the current community string to Valid or Invalid.
Click Apply after making changes to the settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.