Filter
Top Products
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 4-3
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
To log on to the GbE Interconnect Switch for the first time:
1. Click OK at the Enter Network Password dialog box. No initial user name or password
is set for the first user. The main page in the Web-based management module is
displayed.
The main page displays the main menu, an active graphic of the GbE Interconnect
Switch, and the TCP/IP Parameters Setup window.
The active graphic of the GbE Interconnect Switch allows you to monitor the GbE
Interconnect Switch status. Graphical LEDs display current link speed and activity.
Graphical RJ-45 connectors allow you to display statistics for individual ports. Refer to
the section, “Monitoring the GbE Interconnect Switch Using the Active Switch Graphic,”
for detailed information.
The TCP/IP Parameters Setup window is used to determine whether the GbE
Interconnect Switch should get its IP address settings from the user (Manual), a BOOTP
server, or a DHCP server. Refer to the section “Configuring IP Address.”
2. Click the small square hyperlink to the left of the folder icons to display a list of
additional menus used to configure, manage, monitor, and maintain the GbE Interconnect
Switch.
Setting Up New Users
You can set up a maximum of eight users on a GbE Interconnect Switch.
NOTE: After logging on to the GbE Interconnect Switch for the first time, you must set up at least one
user account with Root privileges.