Runtime Switching Software Default Settings
C-2 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:08 AM
Table C-1: Switch A and Switch B: General Default Settings continued
Setting Value
Switch GVRP Disabled
Telnet Status Enabled
Web Status Enabled
Group Address Filter Mode Forward all unregistered
Scheduling Mechanism for COS Queues Strict
Trunk Load Sharing Algorithm Src Address
Backpressure Disabled
Port State Enabled
Port Speed/Duplex Auto
Flow Control Off
Setup Restart Ingress Bandwidth None
Setup Restart Egress Bandwidth None
Switch STP Enable
Bridge Max Age 20 seconds
Bridge Hello Time 2 seconds
Bridge Forward Delay 15 seconds
Bridge Priority 32768
Configure Static Unicast Filtering Table None
Configure Static Multicast Filtering Table None
Configure Static VLAN Entry Default VLAN (VID = 1)
Default Port VID 1
Default Port Ingress Rule Checking Off
Port GVRP Setting Off
IGMP Snooping—VLAN ID 1
IGMP Snooping—State Enabled
IGMP Snooping—Querier State Non-querier
IGMP Snooping—Robustness Variable 2
IGMP Snooping—Query Interval 125 seconds
IGMP Snooping—Max Response 10 seconds
Port Trunking Xconnect (Port 17–18)
Port Mirroring—Source Port 1
Port Mirroring—Source Direction Ingress and Egress
Port Mirroring—Target Port 11
continued