Filter
Top Products
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 4-19
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Configuring Multicast Filtering
When you select Multicast Filtering from the Static Filtering Table menu, the following
screen is displayed.
The Add Multicast Filtering window allows you to set up multicast filtering on the GbE
Interconnect Switch.
You can change the following parameters:
• MAC Address—Type the MAC address of the static source of multicast packets.
• VID—Type the VID number of the VLAN to which the MAC address belongs.
• Type—Choose the filter type, either Permanent or DeleteOnReset.
• Port Map—Select the ports that will be members of the static multicast group and ports
that have no restrictions from joining dynamically.
Click Apply after making changes to the settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using the
Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,” earlier in
this chapter.
Configuring the Static VLAN Entry
The VLAN menu allows you to configure the following:
• Static VLAN entry
• Port VLAN ID (PVID)