Filter
Top Products
Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 3-37
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Assigning Port Default Priority
To assign port default priority:
1. Highlight Configure Default Priority on the Configure Class of Service, Default
Priority and Traffic Class menu.
2. Press the Enter key. The following screen is displayed.
3. Type the port range in Configure Port fields.
4. Highlight APPLY and press the Enter key.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.