Compaq Interconnect Switch Switch User Manual


 
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 4-59
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
Rebooting the GbE Interconnect Switch
When you select Restart System from the Maintenance menu, the following screen is
displayed.
Restart System allows you to perform a reboot of the GbE Interconnect Switch, which resets
the system.
To restart the system:
1. Select Yes or No to save the settings.
2. Click Restart.
Setting the Connection Timeout
When you select Connection Timeout from the Maintenance menu, the following screen is
displayed.
The Web Timeout Setup screen allows you to set the timeout interval.
To enter the Web timeout setting:
1. Type the desired age-out time in the Timeout (minutes) field.
2. Click Apply.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,”
earlier in this chapter.