Filter
Top Products
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
4-18 Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
• ByPass—Choose Yes or No. The bypass sets the forward delay timer to zero, thus
bypassing the waiting time before the listening state. (This procedure is also known as
fast forward.)
Click Apply after making changes to the settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using the
Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,” earlier in
this chapter.
Configuring Unicast Filtering
The Static Filtering Table menu allows you to change the parameters for unicast filtering
and multicast filtering.
When you select Unicast Filtering from the Static Filtering Table menu, the following
screen is displayed.
The Add Unicast Filtering window allows you to set up static packet filtering on the GbE
Interconnect Switch.
You can change the following parameters:
• MAC Address—Type the MAC address from which packets will be statically filtered.
• VID—Type the VID number of the VLAN to which the MAC address belongs.
• Type—Choose the filter type, either Permanent or DeleteOnReset.
• Port Map—Select the port on which the MAC address resides.
Click Apply after making changes to the settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using the
Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,” earlier in
this chapter.