Filter
Top Products
Configuring the GbE Interconnect Switch Using the Console Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 3-55
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 9:59 AM
Downloading Configuration File from a TFTP Server
To download a GbE Interconnect Switch configuration file from a TFTP server:
1. Highlight Use a Configuration File on TFTP Server on the Switch Utilities menu.
2. Press the Enter key. The following screen is displayed.
3. Type the IP address of the TFTP server in the Server IP Address field.
4. Type the location of the GbE Interconnect Switch configuration file on the TFTP server
in the Path\Filename field.
5. Highlight APPLY and press the Enter key to record the IP address of the TFTP server.
6. Highlight START and press the Enter key to initiate the file transfer.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using
the Save Changes option on the main menu. Refer to the “Saving Changes” section earlier in this
chapter.
Saving Settings to a TFTP Server
After completing the final configuration for the GbE Interconnect Switch, Compaq highly
recommends that you save the GbE Interconnect Switch configuration file to TFTP server
storage.