Filter
Top Products
Configuring the GbE Interconnect Switch Using the Web-Based Management Interface
Compaq ProLiant BL p-Class GbE Interconnect Switch User Guide 4-33
COMPAQ CONFIDENTIAL Codename: Vanilla Part Number: 263680-001 Last Saved On: 4/23/02 10:02 AM
• Remote IP Address—Remote IP address of the SLIP connection.
• MTU—Specifies the size of the transferring IP packets. The default value is 1006.
Click Apply after making changes to the settings.
NOTE: To save the configuration settings permanently, you must enter them into NVRAM using the
Save Changes option on the Maintenance menu. Refer to the section, “Saving Changes,” earlier in
this chapter.
Configuring the Security IP
When you select Security IP from the Management menu, the following screen is displayed.
The Security IP Management window allows you to specify IP addresses that are allowed to
access the GbE Interconnect Switch.
To specify which IP addresses are allowed to access the GbE Interconnect Switch:
1. Type the appropriate IP addresses.
2. Click Apply.