Filter
Top Products
2-16
Getting started
User’s Guide for the Magna™ Class Printer
Figure 2-15: Load new print ribbon on the ribbon cartridge
♦
Replace the print ribbon cartridge
1 Place the ribbon cartridge onto the ribbon cartridge supports, and
press down until it clicks into place (see Figure 2-16).
Figure 2-16: Replace the print ribbon cartridge
2 Close the swing arm, pressing it down until the push latch clicks
into place.
3 To close the cover, lift the top slightly. Move the support up so it is
parallel with the hinges, and lower the cover.
4 If you are installing the print ribbon for the first time be sure to
print a printer test card after installing the printer driver. (See
“Making and evaluating test cards” on page 2-29 for more
information.)
Ribbon take-up
Ribbon supply
Ribbon take-up
Print ribbon supply
MagnaUserGuide.book Page 16 Friday, May 5, 2000 1:09 PM