Filter
Top Products
B-4
User’s Guide for the Magna™ Class Printer
If you change the type of ribbon you use, be sure to make the
appropriate changes to the Magna Class printer driver. See
“Changing the type of print ribbon” on page 5-13.
Overlay material
Use Datacard's DuraGard™ overlay material in the Magna Class
printer.
The following describes the overlay materials you can use:
i
Name Part number Description
DuraGard
Overlay supply
0.5 mil
557171-001 Full-card die-cut polyester patches
on a carrier material.
About 300 uses.
DuraGard
Overlay supply
1 mil
557171-101 Full-card die-cut polyester patches
on a carrier material.
About 250 uses.
DuraGard
Smart card
overlay supply
0.5 mil
557171-002 Die-cut polyester patches, 0.5 mil
thick, on a carrier material. Patches
cover all of the card except the area
of the smart card chip.
About 300 uses.
DuraGard
Smart card
overlay supply
1 mil
557171-102 Die-cut polyester patches, 1 mil
thick, on a carrier material. Patches
cover all of the card except the area
of the smart card chip.
About 250 uses.
Holographic
overlay supply
0.6 mil
547562-001 Die-cut polyester patches on a
carrier material with a tamper-
evident image.
About 250 uses.
MagnaUserGuide.book Page 4 Friday, May 5, 2000 1:09 PM