Filter
Top Products
3-10
Using the printer
User’s Guide for the Magna™ Class Printer
To exit or stop the Status Monitor, double-click on the Status Monitor
icon and select Exit. You should exit the Status Monitor when you
receive instructions to do so.
You cannot exit the Status Monitor while printing a card.
Starting or quitting diagnostics
The Start Diagnostics button on the Status dialog box changes the
Magna Class printer driver from printing mode to diagnostics mode.
When you select this button, a message appears informing you that
printing of cards will stop in diagnostics mode.
You cannot start diagnostics mode while printing a card. Wait until all
cards are printed and then click the Start Diagnostics button.
When you start diagnostics mode, additional tabs appear on the
Status dialog box.
The Quit Diagnostics button on the Status tab changes the Magna
Class printer driver from diagnostics mode to printing mode. When
you select this button, a message appears informing you that the
printer will reset; you can resume printing cards. The internal
components will move into the position for printing cards.
If you have entered diagnostics mode and selected the Close
button in the Status dialog box, a message appears that allows
you to quit diagnostics before closing the Status dialog box.
Starting or quitting advanced setup
The Advanced Setup button on the Status dialog box changes the
Magna Class printer driver from printing mode to advanced setup.
After you start advanced setup, additional tabs appear on the Status
dialog box.
You cannot start advanced setup while printing a card. Wait until
all cards are printed, and then click Advanced Setup.
In advanced setup, you can change printing intensity, position of
printing, and select a new overlay material type.
E
E
E
E
MagnaUserGuide.book Page 10 Friday, May 5, 2000 1:09 PM