Filter
Top Products
2-2
Getting started
User’s Guide for the Magna™ Class Printer
•
Do not use the Magna Class printer for purposes other than its
intended use.
•
When cleaning around the Magna Class printer, prevent debris
from entering the printer.
•
Place the Magna Class printer in a clean office environment,
protected from any type of construction.
•
Store all supplies (ribbons, cards, etc.) in the original packaging
until loaded in the cartridges. Keep the original packaging closed.
•
Store all supplies in a clean, cool, dry location. See “Supply roll
storage” on page B-5 for information about the storage
environment for Magna Class supplies.
Selecting the site
After meeting general requirements, the site for the Magna Class
printer should meet the electrical, physical, and environmental
requirements of the printer. Finally, be sure to select an appropriate
site for printer supplies.
Electrical requirements
The Magna Class printer requires the following electrical conditions
for optimal performance:
•
90-254 VAC at 50/60 Hz (The Magna Class printer automatically
adjusts to any power within this range.)
•
Single phase, 3-wire grounded receptacle only
The maximum input current for the Magna Class printer is 3 amps at
100 VAC applied.
Physical requirements
The Magna Class printer requires an environment that
accommodates its physical dimensions and weight.
The printer weighs between 36 and 44 pounds or 16.4 and 19.5
kilograms. The weight varies depending on the options installed in the
printer.
MagnaUserGuide.book Page 2 Friday, May 5, 2000 1:09 PM