Filter
Top Products
C-6
User’s Guide for the Magna™ Class Printer
10 Select OK to save the change and close the Add Users and
Groups window.
11 Repeat steps 6 through 10 to add other users or groups.
12 Select OK to save the changes and close the Printer Permissions
window.
13 Select OK to close the Properties dialog box.
♦
Setting a smart card serial port—Windows NT
If you use a smart card application, you connect the PC to the serial
port on the Magna Class printer. The PC should be set to match the
printer serial port settings. This section describes how to set the PC
serial port in the Windows NT 4.0 operating system. These settings
apply to ports for both a contact smart card module and a contactless
smart card module. If you use a contact station with the printer, see
the information for the contact station for port settings.
Set the serial port on Windows NT
1 From the Start menu, select Settings and then Control Panel.
2 From the Control Panel, select Ports.
3 From the Ports dialog box, select the port, such as COM1 or
COM2 (Figure C-2).
Figure C-2: Ports dialog box
MagnaUserGuide.book Page 6 Friday, May 5, 2000 1:09 PM