Filter
Top Products
Maintaining the printer
4-13
User’s Guide for the Magna™ Class Printer
Figure 4-12: Replace the printhead cartridge
5 Clean the printhead. Move the cleaning pen up and down along
the length of the printhead edge. Be sure to completely clean the
rounded edge of the printhead.
6 Close the swing arm, pressing it down until the push latch clicks
into place.
7 Gently pull the excess printhead cartridge cable out of the top of
the swing arm.
8 Remove the ESD strap.
9 To close the cover, lift the top slightly. Move the support up so it is
parallel with the hinges and lower the cover.
10 Power on the printer.
11 Print a card to verify the quality of printing. You can print a
Windows test page or a card using your card creation application.
If card quality is still inadequate, see “Troubleshooting” on
page 6-1.
♦
2
MagnaUserGuide.book Page 13 Friday, May 5, 2000 1:09 PM