Datacard Group SP Series Printer User Manual


 
Getting started
2-7
Users Guide for the Magna Class Printer
Users Guide
Printer driver
Supplies kit if one was ordered with this printer
Figure 2-4: Place the card output stacker on the printer
9 Place the card output stacker on the right end of the printer
(Figure 2-4). The card output stacker hooks into the printer.
10 Make sure the card cartridge is securely seated in the printer. If
needed, move it gently to seat it.
11 Remove the printhead packing tape.
a Lift the top cover and then move the support down so it rests
on the internal frame, as shown in Figure 2-5.
MagnaUserGuide.book Page 7 Friday, May 5, 2000 1:09 PM