Filter
Top Products
Maintaining the printer
4-7
User’s Guide for the Magna™ Class Printer
Figure 4-6: Clean the printing surface of the printhead
5 Close the swing arm, pressing it down until the push latch clicks
into place.
6 Connect the power cable to the power source and power on the
printer.
7 Print a card to verify the quality of printing. You can print a
Windows test page or a card using your card creation application.
If card quality is still inadequate, see “Troubleshooting” on
page 6-1.
♦
Cleaning the supply tracker
The supply tracker in the optional overlay module can become
slippery, which might cause messages to appear. Clean the supply
tracker weekly or when needed.
Use a printer cleaning card to clean the supply tracker. You can also
use a duplex/overlay cleaning card; however, it is more difficult to
clean the full width of the supply tracker.
MagnaUserGuide.book Page 7 Friday, May 5, 2000 1:09 PM