Datacard Group SP Series Printer User Manual


 
Maintaining the printer
4-3
Users Guide for the Magna Class Printer
The printer module is cleaned and the printer is ready to resume
normal operation.
Using the duplex/overlay cleaning card
If the model of your printer is M2, ML or M2L, use the duplex/overlay
cleaning card to maintain card quality and reduce the likelihood of
jammed cards in the duplex and/or overlay modules.
Use the duplex/overlay cleaning card once a month or when
problems occur, such as repeated card jams in the duplex or overlay
modules. See Supplies and cards on page B-1 for ordering
information.
Use the duplex/overlay cleaning card
1 Remove the card cartridge and set it aside.
If the print ribbon sticks to the duplex/overlay cleaning card,
remove the print ribbon and repeat this procedure with a new
duplex/overlay cleaning card.
2 Peel the middle strip of protective paper from both sides of the
duplex/overlay cleaning card.
The outside protective paper strips must stay on the card.
Figure 4-3: Duplex/overlay cleaning card
3 Insert the duplex/overlay cleaning card near the bottom of the
card cartridge cavity (see Figure 4-4).
i
Keep
Remove
Keep
MagnaUserGuide.book Page 3 Friday, May 5, 2000 1:09 PM