Datacard Group SP Series Printer User Manual


 
4-10
Maintaining the printer
Users Guide for the Magna Class Printer
b Use the cleaning stick to move the heated roller
counterclockwise and make another area available for
cleaning (step 2 in Figure 4-9).
If the heated roller does not move, clean the visible area and
continue with step 5.
c Repeat steps a and b to clean the entire area of the heated
roller.
Figure 4-9: Clean the heated roller
5 Replace the overlay cartridge. See Replacing the overlay
cartridge on page 2-20.
6 Close the cover by lifting the top slightly. Move the cover support
up so it is parallel with the hinges. Close the cover of the printer.
7 Power on the printer to resume card production.
8 Repeat if needed.
E
1
2
MagnaUserGuide.book Page 10 Friday, May 5, 2000 1:09 PM