Filter
Top Products
2-18
Getting started
User’s Guide for the Magna™ Class Printer
Figure 2-17: Remove the overlay cartridge
3 Pull out on the cartridge lock to release the overlay cartridge
(step 2 in Figure 2-17).
4 Pull the overlay cartridge out until the cartridge is out of the
printer (step 3 in Figure 2-17).
♦
Loading overlay in the cartridge
After removing the overlay cartridge from the printer, remove the used
overlay material and load new overlay material.
Load overlay in the cartridge
1 Place the overlay cartridge upside down on a level surface, such
as a table, with the wide side away from you.
2 Pull up firmly on the full take-up spool to remove it.
3 Remove the end of the supply material from the empty supply
spool if needed. Dispose of the used supply according to your
policy.
1
2
3
MagnaUserGuide.book Page 18 Friday, May 5, 2000 1:09 PM