Filter
Top Products
• To not run inventory schedules, select Do not run inventory on Dell hosts.
2. If you select On Selected Days, then do the following:
a. Select the check box next to each day of the week that you want to run the inventory.
b. In the text box, enter the time in HH:MM format.
The time you enter is your local time. Therefore, if you want to run the inventory at the virtual appliance time
zone, calculate the time difference between your local and virtual appliance time zone, and then enter the time
appropriately.
3. To apply the changes and continue, click Save and Continue.
Running A Warranty Retrieval Job [Wizard]
The warranty retrieval job configuration is similar between the wizard and from the Dell Management Center → Settings
option. In addition, you can run the Warranty Retrieval Job now, from Job Queue.
To run a warranty retrieval job:
1. In the Configuration Wizard, on the Warranty Schedule window, do one of the following:
• To run warranty schedules, click On Selected Days.
• To not run warranty schedules, select Do not retrieve Warranty Data.
2. If you selected On Selected Days, then do the following:
a. Select the text box next to each day of the week that you want to run the warranty jobs.
b. In the text box, enter the time in HH:MM format.
The time you enter is your local time. Therefore, if you want to run the inventory at the virtual appliance time
zone, calculate the time difference between your local and virtual appliance time zone, and then enter the time
appropriately.
3. To apply the changes and continue, click Save and Continue.
Configuring the Deployment Credentials [Wizard]
Deployment credentials are used to communicate securely with a bare-metal system that is discovered using
AutoDiscovery. For secure communication, it uses iDRAC from initial discovery until the end of the deployment process.
Once deployment completes, the credentials are changed to those in the connection profile matched to the bare-metal
system from the Deployment wizard. If the deployment credentials are changed, all newly discovered systems from that
point on are provisioned with the new credentials; however, the credentials on servers discovered prior to the change
are not affected.
NOTE: OpenManage Integration for VMware vCenter acts as a provisioning server. The Deployment credentials
are set on the iDRAC that uses the plug-in as a provisioning server in the Auto Discovery process.
To configure the deployment credentials:
1. In the Deployment Credential window you can view or change the credentials. The bare— metal server switches
from these credentials to those specified in the Connection Profile.
2. To change these credentials, under Credentials for Bare Metal Server Deployment, do the following:
a. In the User name text box, edit the user name.
b. In the Password text box, edit the password.
c. In the Verify Password, text box, confirm the password.
3. To save the specified credentials and continue with the Configuration Wizard, click Save and Continue.
20