Filter
Top Products
6. To add the settings to the profile, click Save.
7. In the left pane, click vCenter Settings, and then edit where required:
• vCenter Instance: Displays the server instance that manages a host after deployment.
• vCenter Version: Displays the current version.
• vCenter Destination Container: Datacenter or cluster that hosts the new physical servers; click Browse to
search for vCenter destinations.
• vCenter Host Profile: Select a profile that encapsulates host configuration and helps to manage host
configuration.
8. To add the information to the profile, click Save.
For information on Managing Hypervisor Profiles, see Managing Hypervisor Profiles.
Managing Hypervisor Profiles
There are several management actions you can perform on existing hypervisor profiles, including:
• Understanding VLAN Support
• Viewing Or Editing Hypervisor Profiles
• Duplicating Hypervisor Profiles
• Renaming Hypervisor Profiles
• Deleting A Hypervisor Profile
• Refreshing Hypervisor Profiles
VLAN Support
The OpenManage Integration for VMware vCenter supports hypervisor deployment to a routable VLAN. Configure VLAN
support in the Deployment Wizard. In this portion of the Deployment Wizard, there is an option to specify use of VLANs
and to specify a VLAN ID. When a VLAN ID is provided, it is applied to the hypervisor's management interface during
deployment and tags all traffic with the VLAN ID.
Make sure that the VLAN provided during deployment communicates with both the virtual appliance and the vCenter
server. The deployment of a hypervisor to a VLAN that cannot communicate to one or both of these destinations causes
the deployment to fail.
If you have selected multiple bare-metal servers in a single deployment job and want to apply the same VLAN ID to all
the servers then on the Server Identification portion of the Deployment Wizard, under Default Settings, use the
Apply
settings to all selected servers
button. This option lets you apply the same VLAN ID along with the other network
settings to all the servers in that deployment job.
NOTE: The OpenManage Integration for VMware vCenter does not support a multi-homed configuration. Adding a
second network interface to the appliance for communication with a second network causes problems for the
work flows involving hypervisor deployment, server compliance, and firmware updates.
62