Filter
Top Products
Dell™ Printer Configuration Web Tool 163
Va lues:
Fax Defaults
Purpose:
To create your own default Fax settings.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va lues:
Fax Settings
Purpose:
To configure the Fax settings.
NOTE: You cannot set up the items on the Fax Settings page unless you set up the country code under Country.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
Va lues:
2 Sided Copying Sets whether to print on both sides of a sheet of paper.
Binding of Original Sets the binding position for the 2-sided copying.
2-Up Off
*
Does not perform multiple-up printing.
Auto Automatically reduces the original pages to fit onto one sheet of paper.
Manual Prints the original pages onto one sheet of paper in the size specified for
Reduce/Enlarge.
Margin Top/Bottom Sets the value of the top and bottom margins within the range of 0 mm (0.0 inch) to 50 mm (2.0
inch).
Margin Left/Right Sets the value of the left and right margins within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch).
Margin Middle Sets the value of the middle margin within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch).
Resolution Standard
*
Suitable for documents with normal sized characters.
Fine Suitable for documents containing small characters or thin lines or
documents printed using a dot-matrix printer.
Super Fine Suitable for documents containing extremely fine detail. The super fine
mode is enabled only if the remote machine also supports the Super Fine
resolution.
Photo Suitable for documents containing photographic images.
2 Sided Scanning Sets whether to scan both sides of a document.
Binding of Original Sets the binding position for the 2-sided scanning.
Darken/Lighten Sets the default density to fax your documents lighter or darker.
Delayed Send Sets the fax transmission start time when sending a fax at a specified time.
Fax Number Allows you to enter the fax number of the printer, which will be printed on the header of faxes.
Country Sets the country where the printer is used.
Fax Header Name Allows you to enter a name that will be printed on the header of faxes.
Line Type Sets the default line type; PSTN or PBX.
Line Monitor Sets the volume of the line monitor, which audibly monitors a transmission through the internal
speaker until a connection is made.