Filter
Top Products
Dell™ Printer Configuration Web Tool 165
Scan Defaults
Purpose:
To create your own default Scan settings.
Va lues:
Redial Attempts Sets the number of redial attempts (0–13) to make if the destination fax number is busy. If you enter
0, the printer will not redial.
Interval of Redial Sets the interval (1–15 minutes) between redial attempts.
Resend Delay Sets the interval (3–255 seconds) between re-send attempts.
Tone/Pulse Sets whether to use tone or pulse dialing.
Prefix Dial Sets whether to set a prefix dial number.
Prefix Dial Number Sets a prefix dial number of up to five digits. This number dials before any auto dial number is started.
It is useful for accessing the Private Automatic Branch Exchange (PABX).
Fax Cover Page Sets whether to attach a cover page to faxes.
Fax Header Sets whether to print the information of the sender on the header of faxes.
ECM Sets whether to enable the Error Correction Mode (ECM). To use the ECM, the remote machines
must also support the ECM.
Modem Speed Allows you to adjust the fax modem speed when a fax transmission or reception error occurs.
Display Manual Fax
Recipients
Sets whether to show the fax number of the recipient on the Sending Fax screen when manually
sending a fax.
Fax Activity Sets whether to automatically print a fax activity report after every 50 incoming and outgoing fax
communications.
Fax Transmit Sets whether to print a transmission report after every fax transmission or only when an error occurs.
Fax Broadcast Sets whether to print a transmission report after every fax transmission to multiple destinations or
only when an error occurs.
Fax Protocol Sets whether to print the protocol monitor report after every fax transmission or only when an error
occurs.
File Format Sets the file format in which scanned documents are to be saved.
Output Color Sets whether to scan in color or in black and white.
Resolution Sets the default scan resolution.
Original Size Sets the paper size of the original.
2 Sided Scanning Sets whether to scan both sides of a document.
Binding of Original Sets the binding position for the 2-sided scanning.
Darken/Lighten Sets the default scan density.
Sharpness Sets the default sharpness level.
Contrast Sets the default contrast level.
Auto Exposure Sets whether to suppress the background of the original to enhance text on the copy.
Auto Exposure Level Sets the default background suppression level.
Margin Top/Bottom Sets the value of the top and bottom margins within the range of 0 mm (0.0 inch) to 50 mm (2.0
inch).
Margin Left/Right Sets the value of the left and right margins within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch).
Margin Middle Sets the value of the middle margin within the range of 0 mm (0.0 inch) to 50 mm (2.0 inch).
TIFF File Format Sets the TIFF file format to TIFF V6 or TTN2.