Filter
Top Products
Understanding the Printer Menus 265
Adjust Transfer Belt Unit
Purpose:
To adjust the transfer bias when ghosting occur. (The ghost image may be the image of the previous page, or a part of
the page currently printing)
Va lues:
Adjust 2nd BTR
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To specify the transfer roller voltage adjustment for each paper type.
Va lues:
Adjust Fusing Unit
NOTE: The print quality changes depending on the setting values you select for this item.
Purpose:
To adjust the temperature setting of the fusing unit for each paper type.
K Offset 0
*
If faint black colored ghosts appear, try to decrease the value.
Available Range: -5 to +5
YMC Offset 0
*
If faint ghosts in color (yellow, magenta, or cyan) appear, try to decrease
the value.
Available Range: -5 to +5
Plain 0
*
Sets the transfer roller voltage in increments of 1. The default settings
may not give the best output on all paper types. If you see mottles on
the print output, try to increase the voltage. If you see white spots on
the print output, try to decrease the voltage.
Available Range: -5 to +10
Plain Thick 0
*
Available Range: -5 to +10
Covers
(106-163g/m
2
)
0
*
Available Range: -5 to +10
Covers Thick
(164-216g/m
2
)
0
*
Available Range: -5 to +10
Coated
(106-163g/m
2
)
0
*
Available Range: -5 to +10
Coated Thick
(164-216g/m
2
)
0
*
Available Range: -5 to +10
Label 0
*
Available Range: -5 to +10
Envelope 0
*
Available Range: -5 to +10
Recycled 0
*
Available Range: -5 to +10