Filter
Top Products
164 Dell™ Printer Configuration Web Tool
DRPD Pattern Sets the Distinctive Ring Pattern Detection (DRPD) setting from Pattern1 to Pattern7.
DRPD is a service provided by some telephone companies.
Receive Mode Fax
*
Automatically receives faxes.
Telephone Automatic fax reception is turned off. You can receive a fax by picking up the
handset of the external telephone and then pressing a remote receive code, or by
selecting
Manual Receive in On Hook and then pressing the (Start)
button. For details about Manual Receive, see "Receiving a Fax Manually in
the Telephone Mode."
Telephone/Fax When the printer receives an incoming fax, the external telephone rings for the
time specified in Auto Receive Tel/Fax, and then the printer automatically
receives a fax. If an incoming call is not a fax, the printer beeps from the internal
speaker indicating that the call is a telephone call.
Ans Machine/Fax The printer can share a telephone line with an answering machine. In this mode,
the printer will monitor the fax signal and pick up the line if there are fax tones. If
the telephone communication in your country is serial, this mode is not
supported.
DRPD Before using the Distinctive Ring Pattern Detection (DRPD) option, a distinctive
ring service must be installed on your telephone line by the telephone company.
After the telephone company has provided a separate number for faxing with a
distinctive ring pattern, configure the fax setup to monitor for that specific ring
pattern.
Ring Tone Volume Sets the volume of the ring tone, which indicates that an incoming call is a telephone call through the
internal speaker when Receive Mode is set to Telephone/Fax.
Auto Receive Fax Sets the interval at which the printer goes into the fax receive mode after answering an incoming call.
Auto Receive Tel/Fax Sets the interval at which the printer goes into the fax receive mode after the external telephone
receives an incoming call.
Auto Receive
Answer/Fax
Sets the interval at which the printer goes into the fax receive mode after the external answering
machine receives an incoming call.
Junk Fax Setup Sets whether to reject unwanted faxes by accepting only the faxes from the numbers registered in the
Phone Book
Sent Fax Forward Sets whether to forward incoming faxes to a specified destination.
Forwarding Number Allows you to enter the fax number of the destination to which incoming faxes will be forwarded.
Forwarding E-mail
Address 1
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 2
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 3
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 4
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
Forwarding E-mail
Address 5
Allows you to enter the e-mail address to which incoming faxes are to be forwarded.
2 Sided Printing Sets whether to print on both sides of a sheet of paper.
Remote Receive Sets whether to receive a fax by pressing a remote receive code on the external telephone.
Remote Receive Tone Sets a 2-digit remote receive code when Remote Receive is On.
Discard Size Sets whether to delete text or images at the bottom of a fax page when the entire page does not fit
onto the output paper. Selecting Auto Reduction automatically reduces the fax page to fit it onto the
output paper, and does not discard any images or text at the bottom of the page.