Filter
Top Products
54 Installing Optional Accessories
*1
This item is available only when the optional hard disk is installed.
*2
EAP method supports PEAPv0, EAP-TLS, EAP-TTLS PAP, and EAP-TTLS CHAP.
*3
WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK,
WPA-PSK AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)
NOTE: When the wireless adapter is installed, you cannot use IEEE 802.1x authentication and/or the Ethernet port for a wired
connection.
Verifying the Contents of the Box
NOTE: To complete wireless installation, you require the corresponding Software and Documentation disc that comes with your
printer, which can also be downloaded from support.dell.com.
Installing the Wireless Adapter Using Video Instructions (Recommended)
To install the wireless adapter, perform the following method.
1
Insert the
Software and Documentation
disc in your computer. The
Easy Setup Navigator
file launches
automatically.
2
Select
Optional Accessories Setup
on the
Easy Setup Navigator
window.
Data Transfer Rate IEEE 802.11n: 65 Mbps
IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, and 6 Mbps
IEEE 802.11b: 11, 5.5, 2, and 1 Mbps
Security 64 (40-bit key)/128 (104-bit key) WEP,
WPA- PSK (TKIP, AES), WPA2-PSK (AES), WPA-Enterprise (TKIP, AES)
*1*2
,
WPA2-Enterprise (AES)
*1*2
Wi-Fi Protected Setup
®
(WPS)
*3
Push-Button Configuration (PBC),
Personal Identification Number (PIN)
Item Specification
Installing the Optional
Wireless Adapter
Wireless Adapter