Filter
Top Products
252 Understanding the Printer Menus
2 Sided Print
To set the duplex printing for fax.
Va lues:
Remote Receive
Purpose:
To receive a fax by pressing a remote receive code on the external telephone after picking up the handset of the
telephone.
Va lues:
Discard Size
Purpose:
To set the printer to discard images or any text at the bottom of a fax page when the entire page does not fit the
output paper.
Va lues:
Transmission Defaults
Purpose:
To configure settings for transmitting fax.
Auto Redial Setup
Purpose:
To configure settings for automatic redial.
Va lues:
*1
This item is available only when the E-mail Alert information is registered.
*2
This item is available only when Forwarding E-mail Address is registered.
Off
*
Does not perform duplex printing.
On Performs duplex printing.
Off
*
Does not receive a fax by pressing a remote receive code on the external
telephone.
On Receives a fax by pressing a remote receive code on the external telephone.
Remote Receive Tone Specifies the tone in two digits to start Remote Receive.
Off
*
Prints excess images or text at the bottom of a fax page without discarding it.
On Discards any excess images or text.
Auto Reduction Automatically reduces a fax page to fit it onto the appropriate paper size.
Redial Attempts 3
*
Sets the number of redial attempts to make when the
destination fax number is busy. If you enter 0, the printer
will not redial. The value is set in increments of 1.
Available Range: 0-13