Filter
Top Products
372 Faxing
Specifying the Fax Settings Options
Changing the Fax Settings Options
1
Press the
(Information)
button.
2
Select the
Tools
tab, and then select
Admin Settings
.
3
Select until
Fax Settings
appears, and then select
Fax Settings
.
4
Select the desired menu.
5
Select the desired setting or enter a value.
To enter a value, select or , or use the number pad or the keyboard.
6
Select
OK
.
If necessary , repeat steps 4 through 6.
To return to the
Information
screen, press the
(All Clear)
button.
Available Fax Settings Options
You can use the following settings options for configuring the fax system:
Option Description
Fax Line Settings Fax Number Specifies the fax number of the printer, which will be printed on
the header of faxes. This feature is available when you set
Fax
Header
to On. The number specified in Fax Number is used in
the printer ID.
Country You can select the country where the printer is used.
You can change this setting when:
• No jobs in operation
• No fax jobs waiting in the memory
Fax Header Name Specifies the sender’s name to be printed on the header of faxes.
Line Type You can select the default line type.
•PSTN
•PBX
Line Monitor Sets the volume of the line monitor, which audibly monitors a
transmission through the internal speaker until a connection is
made.
DRPD Pattern Before using the Distinctive Ring Pattern Detection (DRPD)
option, distinctive ring service must be installed on your telephone
line by the telephone company. After the telephone company has
provided a separate number for faxing with a distinctive ring
pattern, configure the fax setup to monitor for that specific ring
pattern.