Filter
Top Products
Maintaining Your Printer 501
Entering Values
When Using the Operator Panel
Using the operator panel, enter the values found in the color registration chart to make adjustments.
1
Press the
(Information)
button.
2
Select the
Tools
tab, and then select
Admin Settings
.
3
Select
Maintenance
.
4
Select until
Color Reg Adjust
appears, and then select
Color Reg Adjust
.
5
Select
Enter Number
.
6
Select
-
or
+
to specify the values for left colors (
LY
,
LM
, and
LC
), and then select
Next
.
7
Select
-
or
+
to specify the values for right colors (
RY
,
RM
, and
RC
), and then select
Next
.
8
Select
-
or
+
to specify the values for process colors (
PY
,
PM
, and
PC
), and then select
OK
.
NOTE: The registration values are always shown as 0 the next time you enter the menu.
9
Select
Color Regi Chart
.
10
Select
Print
.
The color registration chart with the new values is printed.
If the straightest line is not at the value of 0, adjust the values again. Checking the charts before and after the
adjustments will help you to determine the values to enter.